Dixell temp controller manual

Dixell Electronic Controllers This booklet has been produced to assist you with the setting up and programming of Dixell Controllers. It is not designed to totally replace the manufacturer’s manual, but rather to compliment it. Please refer to the manufacturer’s manual when in File Size: KB. Dixell Asia Service Center. Tel. (+66) (24 hrs) Mobile. (+66) 09 (24 hrs) QUICK LINKS. Electrical Control Panels Assembly PLC, SCADA, HMI Building Automation Energy Saving Solutions Installation Services Cold Room Components and Parts. TC=5 Cooling, Electric or Hot Gas Defrost Temperature Ended TC6= Low Temp, Elec. Or Hot Gas Defrost, Temp. Ended, Fan Control TC7= Open Map to be Configured for any application Actual Label on The Control in the Box. Load1 is always Comp, or Heat. Load2 is OAA and Load3 is OAb. Parameter tC Type of Control Models Replaced Required probes.

The “Hi” message will be displayed followed by the maximum temperature recorded. 3. By pressing the o key again or by waiting 5s the normal display will be restored. HOW TO RESET THE MAX AND MIN TEMPERATURE RECORDED 1. Hold press the SET key for more than 3s, while the max. or min temperature is displayed. (rSt message will be displayed) 2. TC=5 Cooling, Electric or Hot Gas Defrost Temperature Ended TC6= Low Temp, Elec. Or Hot Gas Defrost, Temp. Ended, Fan Control TC7= Open Map to be Configured for any application Actual Label on The Control in the Box. Load1 is always Comp, or Heat. Load2 is OAA and Load3 is OAb. Parameter tC Type of Control Models Replaced Required probes. dIXEL Installing and Operating Instructions XR60CX GB mM r doc XR60C 2/4 6. MAIN FUNCTIONS HOW TO SEE THE SETPOINT OdS Outputs activation delay at start up.

View and Download dixell XR06CX operating manual online. DIGITAL CONTROLLER WITH DEFROST AND FANS MANAGEMENT. XR06CX network router pdf manual download. This manual is part of the product and should be kept near the instrument for temperature control, the second one to be located onto the evaporator to. also provided with 2 NTC probe inputs, the first one for temperature control and the second one to be located onto the evaporator, to control the defrost.