Dish network remote code manual

DISH Network remote. If you are unable to fi nd a code that works, try the instructions for Scanning the Remote Database on page 7 6 5 8. 15 Displaying Device Code To identify the device code that your remote control is using, complete the following steps: Press and hold the Mode button until all the Mode buttons light up and then release. DISH Network remote to control another device, such as a TV, DVD, BD, VCR, audio receiver, or amplifier: • Scanning the Remote Database • Entering a Code • Learning Codes Use Scanning the Remote Database if you don’t know the device code. The receiver scans the database of codes for the particular device and tries each code.  · 1. Remove the back cover by pushing the latch upward, and remove the PULL tab. 2. Replace the back cover. 3. Open the front panel of your DISH receiver, and press the SYS INFO button. 4. Press the SAT button on the side of the remote control. You will hear three beeps from the remote control, indicating it has paired with your DISH receiver.

6 Note: Use these steps to convert your TV1 remote to UHF with a DISH receiver. Do not do these steps if you are using the remote with the blue 2 key. If you set up your DISH to operate the. Confi guring the Remote Complete the following steps if you are using the remote with TV2. Pull the remote battery cover off. If the blue 2 key is not showing on the remote, separate the key from the remote by inserting your thumbnail or a coin in the crease. Remove the key by grasping at the bottom. Insert the key face up and. line of sight between the remote and the receiver. Set UHF/IR SWITCH to either UHF or IR. If your remote has a blank, black key, continue to Insert the Batteries on page 2. If your remote shows a “1” or a “2” on the bottom, you can pull out this key and flip it to the other number (2 to 1 and 1 to 2). To separate the key from the remote.

7 Mei How to program newer DISH remote controls · Press the Home button on your DISH remote twice. · Select Settings from the on-screen menu. · Select. You can use a code to program most remotes; if that doesn't work for your selected product, you can also scan through the available codes until. Learn how to program your DISH Network Remote Control to your satellite receiver and other devices such as TV, DVD, VCR and Aux/Audio with the following.